首页 > > 详细

COMP1038辅导、C/C++程序语言辅导

Programming and Algorithms
(COMP1038) Coursework 2
Specification
Programming and Algorithms Teaching Team
Nov 23, 2023
CONTENTS
1 Introduction 1
2 Version History 2
3 Submission 3
4 Plagiarism 4
5 Marking 5
6 Question 6
6.1 Input . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
6.2 Output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
6.3 Sample Inputs and Outputs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
6.4 Sample Files and Command-line Usages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
7 Hints 12
8 Source Code Submission Guide 13
8.1 Keywords . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
8.2 Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
8.3 Technical Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
8.3.1 Command-line Usage for C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
8.4 Submissions Judging Process . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
8.4.1 Submitting solutions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
8.4.2 Compilation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
8.4.3 Testing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
8.4.4 Possible Results . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
8.4.5 Restrictions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
8.5 Code Example . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
i
CHAPTER
ONE
INTRODUCTION
This is the second Programming and Algorithms (COMP1038) Coursework. It is worth 40% of the module mark.
It requires you to write a program which will calculate the costs of train journeys between cities. The deadline for
this exercise is 16:00 on Thursday 14th of December 2023.
Read the entire document before beginning the exercise.
If you have any questions about this exercise, please ask in the Q&A forum on Moodle, after a lecture, in a lab,
or during the advertised office hours. Do not post your program or parts of your program to Moodle as you are
not allowed to share your coursework programs with other students. If any questions require this exercise to be
clarified then this document will be updated and everyone will be notified via Moodle.
1
CHAPTER
TWO
VERSION HISTORY
Warning: The content of this file may change in the future, please always refer to the latest version on Moodle.
• Version 1.0 - 2023-11-23 - Original version.
2
CHAPTER
THREE
SUBMISSION
You must submit a single C source code file containing all your code for this exercise. This file must be called
train.c and must not require any other files outside of the standard C headers which are always available. The
first line of the file should be a comment that contains your student ID number, username, and full name, of the
form:
// 6512345 zy12345 Joe Blogs
The file must compile without warnings or errors using the command
gcc -std=c99 -lm -Wall -fsanitize=leak train.c -o train
This command will be run on our Linux server CSLinux. If it does not compile, for any reason, then you will
lose all the marks for testing (common reasons in the past have been submitting a file with the wrong filename,
or developing your solution on your personal computer without having tested it on our Linux server). If the file
compiles but has warnings then you will lose some marks for not correcting the warnings.
The completed source code file should be uploaded to the Coursework 2 Submission link on the COMP1038
Moodle page. You may submit as many times as you wish and the last submission will be used for marking.
However, if you submit after the deadline, your last submission time will be considered for the Late Submission
penalty. Do not wait until the last moment to submit the coursework. Equipment occasionally breaks down, is full,
inaccessible, or unreliable. You need to plan ahead to allow time for foreseeable things outside of your control to
go wrong.
Late submissions: COMP1038 late submission policy is different from the standard university policy. Late submissions will lose 2 percentage points per hour, rounded up to the next whole hour. This is to better represent the
large benefit a small amount of extra time can give at the end of a programming exercise. No late submissions will
be accepted more than 50 hours after the exercise deadline. If you have extenuating circumstances you should file
them before the deadline.
3
CHAPTER
FOUR
PLAGIARISM
You should complete this coursework on your own. Anyone suspected of plagiarism will be investigated and
punished in accordance with the university policy on plagiarism (see your student handbook and the University
Quality Manual). This may include a mark of zero for this coursework.
You should write the source code required for this assignment yourself. If you use code from other sources
(books, web pages, etc), you should use comments to acknowledge this (and marks will be heavily adjusted down
accordingly). The only exception to this is the example programs given in lectures and tutorials; you may use them,
with or without modification, without penalty.
You must not copy or share source code with other students. You must not work together on your solution. You
can informally talk about higher-level ideas but not to a level of detail that would allow you all to create the same
source code.
A strong warning to the students against using ChatGPT or other AI tools. Firstly, because it is an academic
offense and, secondly, in any case, ChatGPT is not reliable and does not always give the correct answer. Copying
code from other students, from previous students, from any other source (including ChatGPT or other AI tools),
or soliciting code from online sources and submitting it as your own is plagiarism and will be penalized as such.
This can potentially result in failure of coursework, module, or degree.
Remember, it is quite easy for experienced lecturers to spot plagiarism in source code. If you are having
problems you should ask questions rather than plagiarize. If you are not able to complete the exercise then you
should still submit your incomplete program as that will still get you some of the marks for the parts you have done
(but make sure your incomplete solution compiles and partially runs!).
4
CHAPTER
FIVE
MARKING
The marking scheme will be as follows:
• Testing (90%): Your program should correctly implement the task requirements. A number of tests will
be run against your program with different input data designed to test if this is the case for each individual
requirement. The tests themselves are secret but general examples of the tests might be:
– Does the program work with the example I/O in the question?
– Does the program work with typical valid input?
– Does the program correctly deal with input around boundary values?
– Does the program correctly deal with invalid values?
– Does the program handle errors with resources not being available (eg, malloc failing or a filename
being wrong)?
– Does the program output match the required format?
– Your program is required to use a graph representation of the train data. Is that implementation designed
correctly? Is the choice of data structure and algorithm appropriate, correct, and efficient? This is
assessed separately from the tests and general language features sections to focus specifically on your
understanding and implementation of the relevant data structures and algorithms.
As noted in the submission section, if your program does not compile then you will lose all testing marks (90%
marks). Also if you submit a different type of file apart from a single C source code file containing all your code for
this exercise and the file name is different from train.c then you will also lose all testing marks (90% marks). We
usually use an automatic marking system to test/mark your coursework submissions. So you should strictly follow
the output format specified in this task description while implementing your program. Otherwise, your program
will fail to test and you will lose marks.
• Source code formatting (10%): Your program should be correctly formatted and easy to understand by
a competent C programmer. This includes but is not limited to, indentation, bracketing, variable/function
naming, and use of comments. See the lecture notes and the example programs for examples of correctly
formatting programs.
Late Submissions: see the submission section above.
5
CHAPTER
SIX
QUESTION
You are required to write a program that will produce the optimal route and cost C of train tickets between stations.
To complete this task, you will be given a source station S, a destination station D and a distance matrix (in
kilometers) for N stations.
The cost C is defined as:
C = ⌈1.2 ∗ d + 25 ∗ n⌉
where d is the total distance of the route, n is the number of intermediate stations (excluding source and destination
stations), and ⌈x⌉ means x should be rounded up to the next nearest integer.
You should choose an appropriate and efficient algorithm to obtain the shortest route from station S to D. If there
are more than one shortest route, the route with minimal cost C should be used.
Note: Connections do not have to be symmetric, ie, there may be pairs of stations where you can travel from A to
B but not B to A.
6.1 Input
The first line of the input contains N strings of station names, separated by comma ,.
The following N lines is the distance matrix, and each line contains N cells that are separated by comma ,.
The last line of the input contains two strings of source and destination station names S, and D, separated by
comma ,.
The following rules for lines and cells are held:
• There may or may not be a value for each cell.
• Cells without values have nothing between commas or between the start/end of the line and the comma ,.
• Each value can contain any number of any printable ASCII characters, excluding the comma , and newline
\n characters.
• The cell is considered valid if the value contains only a positive integer (e.g. 1, 22 and 333) or nothing.
• Valid value in j-th cell of i-th line (excluding the first line) represents the distance from station i to j, or
there is no direct connection between those two stations the value is empty.
6
Programming and Algorithms (COMP1038) Coursework 2 Specification
6.2 Output
The output should have two lines:
• The first line should contain the total distance and the price of the ticket, separated by comma ,;
• The second line should contain the sequence of the optimal route, also separated by comma ,.
The following case-sensitive strings (with character .) should be the output when satisfy the corresponding condition:
Invalid distance matrix.
Condition: Failed to parse the distance matrix from raw input, or any cell in the distance matrix violates the
rules described in Section Input.
Priority: 5
Invalid source station.
Condition: Failed to parse S from raw input, or the source station does not exist.
Priority: 4
Invalid destination station.
Condition: Failed to parse D from raw input, or the destination station does not exist.
Priority: 3
No journey, same source and destination station.
Condition: If the source and destination stations are the same.
Priority: 2
No possible journey.
Condition: If there is no possible journey between the stations.
Priority: 1
Note: If multiple invalid conditions are satisfied, please only output the one with the highest priority.
For example, in Sample 7, Invalid source station., Invalid destination station. and No journey, same source and
destination station. are satisfied, you should only output Invalid source station.
6.2. Output 7
Programming and Algorithms (COMP1038) Coursework 2 Specification
6.3 Sample Inputs and Outputs
Input 1 output 1
Ningbo,Hangzhou,Suzhou,Changzhou,
,→Shanghai,Taizhou,Wenzhou,Jinhua,
,→Fuzhou,Nanjing
,155,,,,380,,,,
155,,,210,180,,,180,,280
,,,95,90,,,,,
,210,95,,,,,,,130
,180,90,,,,,,,
380,,,,,,610,,,
,,,,,610,,235,325,
,180,,,,,235,,,
,,,,,,325,,,
,280,,130,,,,,,
Ningbo,Suzhou
425,560
Ningbo,Hangzhou,Shanghai,Suzhou
Input 2 output 2
Ningbo,Hangzhou,Suzhou,Changzhou,
,→Shanghai,Taizhou,Wenzhou,Jinhua,
,→Fuzhou,Nanjing
,155,,,,380,,,,
155,,,210,180,,,180,,280
,,,95,90,,,,,
,210,95,,,,,,,130
,180,90,,,,,,,
380,,,,,,610,,,
,,,,,610,,235,325,
,180,,,,,235,,,
,,,,,,325,,,
,280,,130,,,,,,
Ningbo,Ningbo
No journey, same source and destination␣
,→station.
6.3. Sample Inputs and Outputs 8
Programming and Algorithms (COMP1038) Coursework 2 Specification
Input 3 output 3
Ningbo,Hangzhou,Suzhou,Changzhou,
,→Shanghai,Taizhou,Wenzhou,Jinhua,
,→Fuzhou,Nanjing
,155,,,,380,,,,
155,,,210,180,,,180,,280
,,,95,90,,,,,
,210,95,,,,,,,130
,180,90,,,,,,,
380,,,,,,610,,,
,,,,,610,,235,325,
,180,,,,,235,,,
,,,,,,325,,,
,280,,130,,,,,,
Glasgow,341ed admom1 q!!!!
Invalid source station.
Input 4 output 4
Ningbo,Hangzhou,Suzhou,Changzhou,
,→Shanghai,Taizhou,Wenzhou,Jinhua,
,→Fuzhou,Nanjing
,155,,,,380,,,,
155,,,210,180,,,180,,280
,,,95,90,,,,,
,210,95,,,,,,,130
,180,90,,,,,,,
380,,,,,,610,,,
,,,,,610,,235,325,
,180,,,,,235,,,
,,,,,,325,,,
,280,,130,,,,,,
Nanjing,Glasgow
Invalid destination station.
Input 5 output 5
Ningbo,Hangzhou,Suzhou,Changzhou,
,→Shanghai,Taizhou,Wenzhou,Jinhua,
,→Fuzhou,Nanjing
,155,,,,380,,,,
155,,,210,180,,,180,,280
,,,95,90,,,,,
,210,95,,,,,,,130
,180,90,,,,,,,
380,,,,,,610,,,
,,,,,610,,235,325,
,180,,,,,235,,,
,,,,,,325,,,
,280,,130,,,,,,
Wenzhou,Fuzhou
325,390
Wenzhou,Fuzhou
6.3. Sample Inputs and Outputs 9
Programming and Algorithms (COMP1038) Coursework 2 Specification
Input 6 output 6
Ningbo,Hangzhou,Suzhou,Changzhou,
,→Shanghai,Taizhou,Wenzhou,Jinhua,
,→Fuzhou,Nanjing
,155a11!,,,,380,,,,
155,,,210,180,,,180,,280
,,,95,90,,,,,
,210,95,,,,,,,130
,180,90,,,,,,,
380,,,,,,610,,,
,,,,,610,,235,325,
,180,,,,,235,,,
,,,,,,325,,,
,280,,130,,,,,,
Wenzhou,Fuzhou
Invalid distance matrix.
Input 7 output 7
Ningbo,Hangzhou,Suzhou,Changzhou,
,→Shanghai,Taizhou,Wenzhou,Jinhua,
,→Fuzhou,Nanjing
,155,,,,380,,,,
155,,,210,180,,,180,,280
,,,95,90,,,,,
,210,95,,,,,,,130
,180,90,,,,,,,
380,,,,,,610,,,
,,,,,610,,235,325,
,180,,,,,235,,,
,,,,,,325,,,
,280,,130,,,,,,
Glasgow,Glasgow
Invalid source station.
Input 8 output 8
A,B,C,D,E
,1,2,,
1,,,,
2,,,,
,,,,3
,,,3,
A,E
No possible journey.
6.3. Sample Inputs and Outputs 10
Programming and Algorithms (COMP1038) Coursework 2 Specification
6.4 Sample Files and Command-line Usages
To compile the C code:
gcc -std=c99 -lm -Wall -fsanitize=leak train.c -o train
To test the program with the sample files:
./train < 1.in
Then check the output is exactly the same as the content in the corresponding .out files.
To detect memory leak:
valgrind --leak-check=full ./train < 1.in
Note:
• < is used to redirect the input from your keyboard to a given file.
• 1.in is a file containing the input in the same folder as the program, and it may be replaced by other file
names in testing and marking. You can replace it with other .in files such as 2.in as long as it exists.
6.4. Sample Files and Command-line Usages 11
CHAPTER
SEVEN
HINTS
• Remember to free any memory which you no longer need. Your program should not have any memory leaks
(dynamically allocated areas of memory that are no longer reachable). You will need to consider how the
responsibility for allocated data transfers as your program runs.
12
CHAPTER
EIGHT
SOURCE CODE SUBMISSION GUIDE
8.1 Keywords
The keywords MUST, MUST NOT, REQUIRED, SHALL, SHALL NOT, SHOULD, SHOULD NOT, RECOMMENDED, MAY, and OPTIONAL in this guide are to be interpreted as follow:
MUST
This word, or the terms REQUIRED, SHOULD or SHALL, mean that the instruction is an absolute requirement of this guide.
MUST NOT
This phrase, or the phrases SHOULD NOT or SHALL NOT, mean that the instruction is an absolute
prohibition of this guide.
MAY
This word, or the adjective OPTIONAL, mean that the instruction is truly optional.
8.2 Definitions
standard input
This mark, or the mark System.in or stdin, mean that the stream from which input to the program is
taken. Typically this is the keyboard, but it can be specified that input is to come from a serial port or a disk
file, for example.
standard output
This mark, or the mark System.out or stdout, mean that the stream to which output from the program is
sent. Typically this is a display, but it can be redirected to a serial port or a file.
standard error
This mark, or the mark System.err or stderr, mean that the stream to which error output from the program
is sent. Typically this is a display, but it can be redirected to a serial port or a file.

This mark, or the marks \n, \r\n, or , mean the character \n after the last non-whitespace
character in the previous content.
For example, the following representations are all equivalent:
13
Programming and Algorithms (COMP1038) Coursework 2 Specification
\n
first
second
third
last

first\nsecond\nthird\nlast\n
8.3 Technical Notes
This part contains important technical information and it is important that you read and understand all the information below.
• You program MAY have multiple classes if you wish, but only in one C file for each question.
• Your program MUST read its input from standard input.
• Your program SHOULD send its output to standard output. Your program may also send output to
standard error, but only output sent to standard output will be considered during judging.
• If your program exits with a non-zero exit code, it will be judged as a run-error.
• Program submitted will be run inside a sandbox.
– The sandbox will allocate 2GB of memory for your program. Your entire program, including its runtime environment, must execute within this memory limit.
8.3.1 Command-line Usage for C
• Compile:
gcc -std=c99 -lm -Wall -fsanitize=leak train.c -o train
• Execute (for testing):
train < 1.in
8.4 Submissions Judging Process
The judging system is fully automated. Judging is done in the following way:
8.4.1 Submitting solutions
You should submit all related files to Moodle according to the Coursework Issue Sheet.
8.3. Technical Notes 14
Programming and Algorithms (COMP1038) Coursework 2 Specification
8.4.2 Compilation
Your program will be compiled on CSLinux. All submitted source files will be passed to the compiler which
generates a single program to run.
8.4.3 Testing
After your program has compiled successfully it will be executed and its output is compared to the output of the
judges. Before comparing the output, the exit status of your program is checked: if your program exits with a nonzero exit code, the result will be a run-error even if the output of the program is correct! There are some restrictions
during execution. If your program violates these it will also be aborted with a run-error, see restrictions.
When comparing program output, it has to exactly match to output of the judges. So take care that you follow
the output specifications. In case of problem statements which do not have unique output (e.g. with floating point
answers), the system may use a modified comparison function. This will be documented in the problem description.
8.4.4 Possible Results
A submission can have the following results (not all of these may be available depending on configuration of the
system):
CORRECT
The submission passed all tests: you solved this problem!
COMPILER-ERROR
There was an error when compiling your program. On the submission details page you can inspect the exact
error (this option might be disabled). Note that when compilation takes more than 30 seconds, it is aborted
and this counts as a compilation error.
TIMELIMIT
Your program took longer than the maximum allowed time for this problem. Therefore it has been aborted.
This might indicate that your program hangs in a loop or that your solution is not efficient enough.
RUN-ERROR
There was an error during the execution of your program. This can have a lot of different causes like division
by zero, incorrectly addressing memory (e.g. by indexing arrays out of bounds), trying to use more memory
than the limit, reading or writing to files, etc. Also check that your program exits with exit code 0!
NO-OUTPUT
Your program did not generate any output. Check that you write to standard out.
OUTPUT-LIMIT
Your program generated more output than the allowed limit. The solution is considered incorrect.
WRONG-ANSWER
The output of your program was incorrect. This can happen simply because your solution is not correct, but
remember that your output must comply exactly with the specifications of the judges. See testing below for
more details.
The judges may have prepared multiple test files for each problem.
8.4. Submissions Judging Process 15
Programming and Algorithms (COMP1038) Coursework 2 Specification
8.4.5 Restrictions
Submissions are run in a sandbox to prevent abuse, keep the system stable and give everyone clear and equal
environments. There are some restrictions to which all submissions are subjected:
compile time
Compilation of your program may take no longer than 30 seconds. After that, compilation will be aborted
and the result will be a compile error.
source size
The total amount of source code in a single submission may not exceed 256 kilobytes, otherwise your submission will be rejected.
memory
The judges will specify how much memory you have available during execution of your program. This may
vary per problem. It is the total amount of memory (including program code, statically and dynamically
defined variables, stack)! If your program tries to use more memory, it will most likely abort, resulting in a
run error.
creating new files
Do not create new files. The sandbox will not allow this and the file open function will return a failure. Using
the file without handling this error can result in a runtime error.
number of processes
You are not supposed to explicitly create multiple processes (threads). This is to no avail anyway, because
your program has exactly 1 processor core fully at its disposal.
People who have never programmed with multiple processes (or have never heard of threads) do not have to
worry: a normal program runs in one process.
internet access
Your programs are not allowed to access the Internet. Any attempts to access the Internet from your programs
will result in a run-error.
8.5 Code Example
Below is the example on how to read input and write output for a problem.
The example is solution for the following problem:
The first line of the input contains the number of testcases. Then each testcase consists of a line
containing a name (a single word) of at most 99 characters. For each testcase output the string Hello
! on a separate line.
Sample input and output for this problem:
Input output
3
world
Jan
SantaClaus
Hello word!
Hello Jan!
Hello SantaClaus!
Note: The number 3 on the first line indicates that 3 testcases follow.
8.5. Code Example 16
Programming and Algorithms (COMP1038) Coursework 2 Specification
Listing 1: A Solution in C
#include
int main()
{
int i, ntests;
char name[100];
scanf("%d\n", &ntests);
for (i = 0; i < ntests; i++)
{
scanf("%s\n", name);
printf("Hello %s!\n", name);
}
}
8.5. Code Example 17

联系我们
  • QQ:99515681
  • 邮箱:99515681@qq.com
  • 工作时间:8:00-21:00
  • 微信:codinghelp
热点标签

联系我们 - QQ: 99515681 微信:codinghelp
程序辅导网!