首页 > > 详细

代写CSE1/4IOO作业、代做Java编程设计作业、代写Java语言作业、代做program作业 帮做Haskell程序|代写Web开发

CSE1/4IOO Assignment – Part 2 1 of 10
CSE1IOO/CSE4IOO Semester 2, 2020
Programming Assignment – Part 2 (20%)
Assessment: This assignment is worth 20% of the final mark for this subject. Please read the entire specification carefully, before you start writing the code. Due Date: Monday, 12 October 2020, at 10 am. Delays caused by computer downtime cannot be accepted as a valid reason for a late
submission without penalty. Students must plan their work to allow for both
scheduled and unscheduled downtime. This is an individual Assignment. You are not permitted to work as a group when
writing this assignment. Copying, Plagiarism: Plagiarism is the submission of somebody else’s work in a
manner that gives the impression that the work is your own. The Department of
Computer Science and Information Technology treats academic misconduct
seriously. When it is detected, penalties are strictly imposed. Refer to the unit guide
for further information and strategies you can use to avoid a charge of academic
misconduct. All submissions will be electronically checked for plagiarism
using latcs8 server program. If you are new at La Trobe, please complete
academic integrity module on LMS to understand what is regarded as an
academic misconduct. Objectives: The general aims of this assignment are:  To analyse a problem in an object-oriented manner, and then design and
implement an object-oriented solution that conforms to given specifications
 To practise using inheritance in Java
 To practise file input and output in Java
 To make implementations more robust through mechanisms such as
exception handling. Submission Details and Marking Scheme: Instructions on how to submit
electronic copies of your source code files from your latcs8 account and a marking
scheme overview are given at the end. If you have not been able to complete a
program that compiles and executes containing all functionality, then you should
submit a program that compiles and executes with as much functionality as you
have completed. (You may comment out code that does not compile.)
NOTE: While you are free to develop the code for this assignment on any operating
system, your solution must run on the latcs8 system.
CSE1/4IOO Assignment – Part 2 2 of 10
NOTE: You can use Arrays or ArrayList or LinkedList of the Java API. If you use
arrays, assume that we never have more than 50 patients in the system. Background
As described in the handout for Part 1, the overall aim of the assignment is to
develop a prototype for a patient record system. In Part 1, you have implemented the classes to represent patients, medical
observation types, and observations. You have also implemented a
PatientRecordSystem class which allows us to add patients, observation types and
observations. Building on the work that you have done for part 1, in this Part 2, you will be
adding more functionalities to the classes and implementing a menu program. You
are required to do the tasks (task 1, 2, and 3) described below. Task 1
Implement two methods for the PatientRecordSystem class to save and load data. **************************************
The first method should have the header:
public void saveData() throws Exception
The method should write the data about observation types, patients, and
observations that are currently in the PatientRecordSystem instance, in five text
files as described below:
1. PRS-MeasurementObservationTypes.txt
The file will contain information about the measurement observation types. The
required format of the text data in the file is shown with an example below:
T100; Blood Pressure; psi
T400; Height; cm
Each measurement observation type must be on a separate line. Each line must
contain the observation type code, name, and unit, separated by semi-colons. 2. PRS-CategoryObservationTypes.txt
The file will contain information about the category observation types. The required
format of the text data in the file is shown with an example below:
CSE1/4IOO Assignment – Part 2 3 of 10
T200; Blood Type; Group A, Group B1, Group B2
T300; Stress Level; Low, Medium, High
Each category observation type must be on a separate line. Each line must contain
the observation type code, name, and the categories. The three elements, i.e., code, name, and categories are separated by semi-colons. The different categories are
separated by commas. 3. PRS-Patients.txt
The file will contain information about the patients’ data without their observations. The required format of the text data in the file is shown with an example below:
P100; John Smith
P200; Anna Bell
Each patient must be on a separate line. Each line must contain the patient’s id and
name, separated by a semi-colon. 4. PRS-MeasurementObservations.txt
The file will contain information about the patients’ measurement observations. The
required format of the text data in the file is shown with an example below:
P100; T100; 120.0
P200; T400; 180
Each measurement observation must be on a separate line. Each line must contain
the patient’s id, the observation code and the observation value (a double). The
fields are separated by semi-colons. 5. PRS-CategoryObservations.txt
The file will contain information about the patients’ category observations. The
required format of the text data in the file is shown with an example below:
P100; T200; Group A
P200; T300, Low
Each category observation must be on a separate line. Each line must contain the
patient’s id, the observation code and the observation value. The fields are
separated by semi-colons. For the saveData() method, refer to the lecture notes of week 5, and revise the
contents related to the use of PrintWriter class.
CSE1/4IOO Assignment – Part 2 4 of 10
**************************************
The second method to load data from text files should have the following header:
public void loadData() throws Exception
The method will read the data from five text files and save them in a
PatientRecordSystem instance by calling methods of the same class to add
measurement observation types, category observation types, etc. For example, when
you read details about a patient from ‘PRS-Patients.txt’ file, you should call the
addPatient() method with those details to add the patient in the
PatientRecordSystem. The data should be loaded into a PatientRecordSystem instance which is empty of
data. For the loadDate() method, revise the lecture notes and text files under week
5 and focus on the Scanner class. You should write a small program to test these two methods. A sample test program
is given in the Appendix 1. As for Part 1, your implementation must be such that the sample test
program can be run without any change. Task 2
Write the menu program, called PatientRecordSystemMenu, to provide options in the
following menu: =====================
Patient Record System
=====================
1. Add a measurement observation type
2. Add a category observation type
3. Add a patient
4. Add a measurement observation
5. Add a category observation
6. Display details of an observation type
7. Display a patient record by the patient id
8. Save data
9. Load data
D. Display all data for inspection
X. Exit
Please enter an option (1-9 or D or X):
CSE1/4IOO Assignment – Part 2 5 of 10
The menu program must use the PatientRecordSystem class. For each option, the
program should ask for the required inputs, each with a separate prompt. For option 6, 7 and D, it is acceptable just to use the toString methods of the classes
involved. After a menu option is selected and the operation is completed, the menu should be
presented to the user again. See Appendix 2 for a short sample run. The menu program for this task is only required to satisfy the data correctness
conditions. It is not required to be robust, i.e. it can crash when certain exceptions
occur. For this task, the examples in lab 3 and lab 4 might be worth looking into. Task 3
Implement a class called RobustPatientRecordSystemMenu, which makes the previous
menu program robust by including exception handling features. It is required to be
robust only in the following sense: when an exception occurs in the execution of an
option, the program will display some information about the exception on the screen
and return to the main menu. Electronic Submission of Your Source Code
Submit all your Java files on LMS submission link. Marking Scheme Overview
The assignment has the total of 100 marks, which are distributed as follows:  Implementation (Execution of code) 90 marks (Do all parts of the programs
execute correctly? Note your programs must compile and run to carry out this
implementation marking. So, comment out the non-working code in your
submission.)  Code Design, Layout and Documentation 10 marks (Does the program
conform to specifications? Does the program solve the problem in a well- designed manner? Does the program follow good programming practices?
Does the indentation and code layout follow a good, consistent standard? Are
the identifiers meaningful? Are comments useful in explaining what and how
the program works? (Javadoc comments are optional.)  A detail marking rubric will be published on LMS soon.
CSE1/4IOO Assignment – Part 2 6 of 10
Appendix 1 – A sample program to test methods to save and load data
import java.io.*;
import java.util.*;
public class PatientRecordSystemTester
{
public static void main(String [] args) throws Exception
{
testSaveData();
testLoadData();
}
public static void testSaveData() throws Exception
{
// Create PatientRecordSystem
// Add observation types , patients and observations
PatientRecordSystem prs = new PatientRecordSystem();
prs.addMeasurementObservationType("T100", "Blood Pressure", "psi");
CSE1/4IOO Assignment – Part 2 7 of 10
String [] categories = {"Group A", "Group B1", "Group B2"};
prs.addCategoryObservationType("T200", "blood type", categories);
String [] temp = {"low", "Medium", "high"};
categories = temp;
prs.addCategoryObservationType("T300", "stress level", categories);
prs.addMeasurementObservationType("T400", "height", "cm");
prs.addPatient("P100", "Smith");
prs.addPatient("P200", "Adams");
prs.addMeasurementObservation("P100", "T100", 120);
prs.addCategoryObservation("P100", "T200", "Group A");
// save data to file
prs.saveData();
}
public static void testLoadData() throws Exception
{
PatientRecordSystem prs = new PatientRecordSystem();
prs.loadData();
System.out.println(prs);
}
}
Appendix 2 – A sample run of the menu program
=====================
Patient Record System
=====================
1. Add a measurement observation type
2. Add a category observation type
3. Add a patient
4. Add a measurement observation
5. Add a category observation
6. Display details of an observation type
7. Display a patient record by patient id
8. Save data
9. Load data
D. Display all data for inspection
X. Exit
CSE1/4IOO Assignment – Part 2 8 of 10
Please enter an option (1-9 or D or X): 2
Enter observation type code: t1
Enter observation type name: stress level
Enter the number of categories: 3
Enter category 1: low
Enter category 2: medium
Enter category 3: high
=====================
Patient Record System
=====================
1. Add a measurement observation type
2. Add a category observation type
3. Add a patient
4. Add a measurement observation
5. Add a category observation
6. Display details of an observation type
7. Display a patient record by patient id
8. Save data
9. Load data
D. Display all data for inspection
X. Exit
Please enter an option (1-9 or D or X): 3
Enter patient ID: p1
Enter patient Name: john smith
=====================
Patient Record System
=====================
1. Add a measurement observation type
2. Add a category observation type
3. Add a patient
4. Add a measurement observation
5. Add a category observation
6. Display details of an observation type
7. Display a patient record by patient id
8. Save data
9. Load data
D. Display all data for inspection
X. Exit
Please enter an option (1-9 or D or X): 5
CSE1/4IOO Assignment – Part 2 9 of 10
Enter patient ID: p1
Enter observation type code: t1
Enter observation type value: medium
=====================
Patient Record System
=====================
1. Add a measurement observation type
2. Add a category observation type
3. Add a patient
4. Add a measurement observation
5. Add a category observation
6. Display details of an observation type
7. Display a patient record by patient id
8. Save data
9. Load data
D. Display all data for inspection
X. Exit
Please enter an option (1-9 or D or X): d
--------------------------
PATIENT RECORD SYSTEM DATA
--------------------------
OBSERVATION TYPES:
-- CategoryObservationType[code: t1, name: stress level, categories: |low|m
edium|high|]
PATIENTS:
-- Patient id: p1, name: john smith Observations:
- CategoryObservation[observationType: CategoryObservationType[code: t1, n
ame: stress level, categories: |low|medium|high|], value: medium]
=====================
Patient Record System
=====================
1. Add a measurement observation type
2. Add a category observation type
3. Add a patient
4. Add a measurement observation
5. Add a category observation
6. Display details of an observation type
7. Display a patient record by patient id
8. Save data
9. Load data
D. Display all data for inspection
X. Exit
Please enter an option (1-9 or D or X): x
CSE1/4IOO Assignment – Part 2 10 of 10 Bye!

联系我们
  • QQ:99515681
  • 邮箱:99515681@qq.com
  • 工作时间:8:00-23:00
  • 微信:codinghelp
热点文章
程序代写更多图片

联系我们 - QQ: 99515681 微信:codinghelp
© 2014 www.7daixie.com
程序代写网!