首页 > > 详细

CSc 360作业代写、代做Operating Systems作业、代写Python编程设计作业、代做Python作业代写Database|帮做Java程序

CSc 360: Operating Systems (Fall 2019)
Programming Assignment 3 (P3): A Simple File System (SFS)
Spec out: Nov 1, 2019
Due Date: Nov 29, 2019
1 1 Introduction
2 So far, you have built a shell environment and a multi-thread scheduler with process synchronization. Excellent job!
3 What is still missing for a “real” operating system? A file system! In this assignment, you will implement utilities
4 that perform operations on a file system similar to Microsoft’s FAT file system with some improvement.
5 1.1 Sample File Systems
6 You will be given a test file system disk image for self-testing, but you can create your own image following the
7 specification, and your submission may be tested against other disk images following the same specification.
8 You should get comfortable examining the raw, binary data in the file system images using the program xxd.
9 VERY IMPORTANT: since you are dealing with binary data, functions intended for string ma-
10 nipulation such as strcpy() do NOT work (since binary data may contain binary ‘0’ anywhere), and
11 you should use functions intended for binary data such as memcpy().
12 2 Tutorial Schedule
13 In order to help you finish this programming assignment on time successfully, the schedule of the lectures and
14 the tutorials has been adjusted. There are two tutorials and one help session arranged during the course of this
15 assignment. NOTE: Please do attend the tutorials and follow the tutorial schedule closely.
Date Tutorial Milestones
Nov 5/7/8 P3 spec and practice questions go-through design done
Nov 12/14/15 reading break, no tutorials coding half done
Nov 19/21/22 more on design and implementation coding done
Nov 26/28/29 no tutorials but a help session final deliverable
16 3 Requirements
17 3.1 Part I (3 points)
18 In part I, you will write a program that displays information about the file system. In order to complete part I, you
19 will need to read the file system super block and use the information in the super block to read the FAT.
20 Your program for part I will be invoked as follows (output value here just for illustration purposes):
./diskinfo test.img
21 Sample output:
Super block information:
Block size: 512
Block count: 5120
FAT starts: 1
FAT blocks: 40
Root directory start: 41
Root directory blocks: 8
FAT information:
Free Blocks: 5071
Reserved Blocks: 41
Allocated Blocks: 8
22 Please be sure to use the exact same output format as shown above.
23 3.2 Part II (3 points)
24 In part II, you will write a program, with the routines already implemented for part I, that displays the contents of
25 the root directory or a given sub-directory in the file system.
26 Your program for part II will be invoked as follows:
./disklist test.img /sub_dir
27 The directory listing should be formatted as follows:
28 1. The first column will contain:
29 (a) F for regular files, or
30 (b) D for directories;
31 followed by a single space
32 2. then 10 characters to show the file size, followed by a single space
33 3. then 30 characters for the file name, followed by a single space
34 4. then the file modification date (we will not display the file creation date).
For example:
F 2560 foo.txt 2005/11/15 12:00:00
F 5120 foo2.txt 2005/11/15 12:00:00
F 48127 makefs 2005/11/15 12:00:00
F 8 foo3.txt 2005/11/15 12:00:00
35 3.3 Part III (3 points)
36 In part III, you will write a program that copies a file from the file system to the current directory in Linux. If the
37 specified file is not found in the root directory or a given sub-directory of the file system, you should output the
38 message File not found. and exit.
39 Your program for part III will be invoked as follows:
./diskget test.img /sub_dir/foo2.txt foo.txt
40 3.4 Part IV (3 points)
41 In part IV, you will write a program that copies a file from the current Linux directory into the file system, at the
42 root directory or a given sub-directory. If the specified file is not found, you should output the message File not
43 found. on a single line and exit.
44 Your program for part IV will be invoked as follows:
./diskput test.img foo.txt /sub_dir/foo3.txt
2
45 3.5 Part V (3 points)
46 From time to time, the disk image may get corrupted due to wrong or incomplete operations, including what happened
47 to the test image, although it does not affect the first four parts. Your fifth part is to go through the disk image
48 according to the file system specification, including the super block, FDT, FAT and data blocks, find inconsistent
49 information among them and fix these issues when possible. For example, a block indicated as reserved (for FAT
50 and root directory) in FAT might be mistakenly used as a data block. In this case, the data shall be relocated, and
51 the FAT and possibly FDT are updated accordingly. Also, a block indicated as allocated in FAT does not belong to
52 any files. In this case, the entry in FAT is fixed to available. Further, a block is the last block of a file according
53 to its size, but it is not indicated by -1 in FAT. In this case, the FAT entry is updated to -1. On the other hand, a
54 block is not the last block of a file according to its size, but it is indicated by -1 in FAT, so the file is truncated up
55 to this last block. Your program needs to be able to handle at least these three cases.
56 Your program for part V will be invoked as follows:./diskfix test.img
57 and output the problems that you identified and possibly fixed, e.g.,
Block 5 indicated reserved in FAT but used by foo.txt; foo.txt relocated
Block 1005 indicated allocated in FAT but not used by any files; fixed to available
Block 2005 is the last block of foo2.txt but not indicated -1 in FAT; fixed to -1
Block 3005 is not the last block of foo3.txt but indicated -1 in FAT; foo3.txt truncated to 4096 bytes
58 4 File System Specification
59 The FAT file system has three major components:
60 1. the super block,
61 2. the directory structure.
62 3. the File Allocation Table (informally referred to as the FAT),
63 Each of these three components is described in the subsections below.
64 4.1 File System Superblock
65 The first block (512 bytes) is reserved to contain information about the file system. The layout of the superblock is
66 as follows:
Description Size Default Value
File system identifier 8 bytes CSC360FS
Block Size 2 bytes 0x200
File system size (in blocks) 4 bytes 0x00001400
Block where FAT starts 4 bytes 0x00000001
Number of blocks in FAT 4 bytes 0x00000028
Block where root directory starts 4 bytes 0x00000029
Number of blocks in root dir 4 bytes 0x00000008
Figure 1: Superblock Fields
67 Note: Block number starts from 0 in the file system.
68 4.2 Directory Entries
69 Each directory entry takes up 64 bytes, which implies there are 8 directory entries per 512 byte block.
70 Each directory entry has the following structure:
71 The description of each field follows:
3
Description Size
Status 1 byte
Starting Block 4 bytes
Number of Blocks 4 bytes
File Size (in bytes) 4 bytes
Create Time 7 bytes
Modify Time 7 bytes
File Name 31 bytes
unused (set to 0xFF) 6 bytes
Figure 2: Directory Entry
Bit 0 set to 0 if this directory entry is available,
set to 1 if it is in use
Bit 1 set to 1 if this entry is a normal file
Bit 2 set to 1 if this entry is a directory
Figure 3: Format of Status Field
72 Status This is bit mask that is used to describe the status of the file. Currently only 3 of the bits are used.
73 It is implied that only one of bit 2 or bit 1 can be set to 1. That is, an entry is either a normal file or it is a
74 directory, not both.
75 Starting Block This is the location on disk of the first block in the file
76 Number of Blocks The total number of blocks in this file
File Size The size of the file, in bytes. The size of this field implies that the largest file we can support is 232
77 bytes
78 long.
79 Create Time The date and time when this file was created. The file system stores the system times as integer
80 values in the format:
81 YYYYMMDDHHMMSS
Figure 4: Format of Date-Time Field
82 Modify Time The last time this file was modified. Stored in the same format as the Create Time shown above.
83 File Name The file name, null terminated. Because of the null terminator, the maximum length of any filename is
84 30 bytes.
85 Valid characters are upper and lower case letters (a-z, A-Z), digits (0-9) and the underscore character ( ).
86 4.3 File Allocation Table (FAT)
87 Each directory entry contains the starting block number for a file, let’s say it is block number X. To find the next
88 block in the file, you should look at entry X in the FAT. If the value you find there does not indicate End-of-File
89 (see below) then that value, call it Y, is the next block number in the file.
90 That is, the first block is at block number X, you look in the FAT table at entry X and find the value Y. The
91 second data block is at block number Y. Then you look in the FAT at entry Y to find the next data block number...
92 continue this until you find the special value in the FAT entry indicating that you are at the last FAT entry of the
93 file.
94 The FAT is really just a linked list, which the head of the list being stored in the “Starting Block” field in the
95 directory entry, and the ‘next pointers’ being stored in the FAT entries.
96 FAT entries are 4 bytes long (32 bits), which implies there are 128 FAT entries per block.
Special values for FAT entries are described in Figure 5.
Value Meaning
0x00000000 This block is available
0x00000001 This block is reserved
0x00000002–
0xFFFFFF00 Allocated blocks as part of files
0xFFFFFFFF This is the last block in a file
Figure 5: Value of FAT entry
97
98 5 Byte Ordering
99 Different hardware architectures store multi-byte data (like integers) in different orders. Consider the large integer:
100 0xDEADBEEF
101 On the Intel architecture (Little Endian), it would be stored in memory as:
102 EF BE AD DE
103 On the PowerPC (Big Endian), it would be stored in memory as:
104 DE AD BE EF
105 Our file system will use Big Endian for storage. This will make debugging the file system by examining the raw
106 data much easier.
107 This will mean that you have to convert all your integer values to Big Endian before writing them to disk. There
108 are utility functions in netinit/in.h that do exactly that. (When sending data over the network, it is expected the
109 data is in Big Endian format.)
110 See the functions htons, htonl, ntohs and ntohl.
111 The side effect of using these functions will be that your code will work on multiple platforms. (On machines
112 that natively store integers in Big Endian format, like the Mac (not the Intel-based ones), the above functions don’t
113 actually do anything but you should still use them!)
114 6 Submission Requirements
115 What to hand in: You need to hand in a .tar.gz file containing all your source code and a Makefile that produces
116 the executables for parts I – V.
117 Please include a readme.txt file that explains your design and implementation.
118 The file is submitted through connex.csc.uvic.ca site.

联系我们
  • QQ:99515681
  • 邮箱:99515681@qq.com
  • 工作时间:8:00-23:00
  • 微信:codinghelp
热点文章
程序代写更多图片

联系我们 - QQ: 99515681 微信:codinghelp
© 2014 www.7daixie.com
程序代写网!